How To Mount A Drive In Windows 10

Although Windows 10 tin can automatically mount a bulldoze, the ability to mountain and unmount a drive manually can come up in handy in many scenarios. For example, when the system does not automatically assign a drive letter upon connecting a new storage device. You formatted a drive using commands, and yous did not specify a mount point. Or you lot demand to unmount a device'due south storage to make information technology permanently inaccessible to users.

Whatever the reason information technology might be, Windows 10 allows y'all to quickly mount or unmount a drive using a graphical interface with Disk Management or with command-line using the mountvol and DiskPart tools in Command Prompt.

In this Windows 10 guide, nosotros will walk through the steps to mount and unmount a drive (or book) using the Disk Management graphical panel and mountvol and DiskPart control-line tools bachelor with Command Prompt.

How to mountain drive on Windows ten
How to unmount drive on Windows 10

How to mount drive on Windows 10

On Windows 10, when you mount a drive manually, yous will create a mountain bespeak with a drive letter that will make the storage bachelor to users and let the system to automatically mount the drive with the same drive letter.

Yous can complete this process in at least three means with the Disk Management console and the mountvol and DiskPart command-line tools.

Mountain drive with Deejay Management

To use Deejay Direction to mount a drive on Windows x, use these steps:

Open Start.
Search for Create and format hard disks partitions and click the top effect to open Disk Direction.
Right-click the bulldoze and select the Change Drive Letter and Path pick.

Source: Windows Central
Click the Add together button.

Source: Windows Key
Select the Assign the following bulldoze letter pick.

Source: Windows Central
Use the drop-down carte and select one of the available letters.

Quick tip: When assigning a letter manually, it's best to showtime with the terminal available letter to have a signal of reference to determine if the volume was mounted manually or automatically.

Once you lot consummate the steps, the drive will mount and appear in the arrangement to store data.

Mount drive with mountvol

To use mountvol to mount a drive, use these steps:

Open Starting time.
Search for Command Prompt, right-click the top result, and select the Run as administrator option.
Type the following command to list all the available mount points and press Enter:

mountvol

Source: Windows Central
Select the mount point path to copy the data to the clipboard.

Quick note: Normally, the book may or may not be listed with the "Non mountable until a volume mountain point is created" characterization. If y'all cannot identify the book, then apply the Deejay Management console instead.
Blazon the following command to mount the volume and printing Enter:

mountvol Drive-LETTER:\ Book-Proper name

In the command, make sure to supersede Drive-LETTER and VOLUME-NAME with the appropriate information.

For example, this control mounts the \\?\Volume{cb44ea97-8283-4cd0-a4e1-fb3a3a914fdc}\ with the eastward bulldoze letter:

mountvol e:\ \\?\Book{cb44ea97-8283-4cd0-a4e1-fb3a3a914fdc}\

Source: Windows Central

After you complete the steps, the volume will be attainable through File Explorer and across the experience.

Mount bulldoze with DiskPart

Alternatively, you can likewise accomplish the task using DiskPart with these steps:

Open Kickoff.
Search for Command Prompt, correct-click the top outcome, and select the** Run as administrator** pick.
Type the following command to start the tool and press Enter:

diskpart
Type the following command to listing all the available volumes and printing Enter:

list book
Confirm the volume you want to mount.
Type the following command to select the drive and press Enter:

select book Book-NUMBER

In the command, replace VOLUME-NUMBER with the number of the drive (volume) you want to mount.

For case, this command selects volume number four:

select book iv

Source: Windows Central
Type the following command to mount the drive on Windows 10 and press Enter:

assign letter DRIVE-LETTER

In the command, replace Drive-Letter of the alphabet with the letter y'all want to mount and admission the storage.

For example, this command mounts the drive and assigns the e bulldoze letter:

assign letter e

How to unmount drive on Windows x

When you unmount a drive manually, you volition remove the mountain point making the storage inaccessible. Also, the system will no longer endeavor to mount it automatically. If you want to brand the drive mountable once more, you lot will demand to revert the changes (see in a higher place steps).

If yous desire to unmount a drive, you can also employ the same Disk Management, mountvol, and DiskPart tools.

Unmount bulldoze with Deejay Management

To unmount a drive with Disk Direction, use these steps:

Open Start.
Search for Create and format hard disks partitions and click the top result to open Disk Management.
Right-click the drive and select the Change Drive Letter of the alphabet and Path option.

Source: Windows Fundamental
Click the Remove push.

Source: Windows Central
Click the Yep push button.

One time yous complete the steps, the drive will no longer be accessible on Windows 10.

Unmount bulldoze with mountvol

To dismount a drive (or volume) with mountvol, apply these steps:

Open Start.
Search for Command Prompt, right-click the top result, and select the Run as administrator option.
Blazon the following control to list all the bachelor mount points and printing Enter:

mountvol

Source: Windows Key
Type the following command to dismount a drive and press Enter:

mountvol DRIVE-Letter:\ /p

In the command, make sure to change DRIVE-LETTER with the correct drive letter of the mount point you are trying to dismount.

For example, this command unmounts the due east:\ mount indicate:

mountvol e:\ /p

Source: Windows Central

Quick note: The /p option will unmount the drive and remove the drive letter. The tool also offers the /d option, but it is only meant to remove mount points individually.

Subsequently you complete the steps, the mount points volition be removed, making the storage inaccessible to users.

Unmount drive with DiskPart

You can also dismount a bulldoze with DiskPart using these steps:

Open Offset.
Search for Command Prompt, correct-click the top result, and select the** Run as administrator** selection.
Type the following command to first the tool and press Enter:

diskpart
Type the following command to list all the available volumes and press Enter:

list book
Ostend the volume you desire to unmount.
Type the following command to select the drive and press Enter:

select volume Book-NUMBER

In the command, supplant Book-NUMBER with the number of the bulldoze (volume) y'all want to mount.

For example, this command selects volume number iv:

select volume 4

Source: Windows Cardinal
Type the following command to unmount the bulldoze on Windows 10 and press Enter:

remove alphabetic character DRIVE-Letter

In the control, replace Bulldoze-LETTER with the alphabetic character of the storage yous want to unmount.

For example, this control dismounts the e drive:

remove letter due east

As well, do not confuse mounting a drive with mounting a drive as a folder, which is something different. You can apply these instructions to mount a drive as a folder.

More Windows 10 resources

For more helpful articles, coverage, and answers to common questions almost Windows 10, visit the post-obit resources:

Windows 10 on Windows Primal – All yous demand to know
Windows x help, tips, and tricks
Windows ten forums on Windows Central